@huukhanhnguyen/geometry / catalog/brep

catalog/brep#

BrepData#

const BrepData: { analyticSection: (json, first_face, second_face, seed_region) => Float64Array; analyzeTolerances: (json) => Float64Array; boundingBox: (json) => Float64Array; boundingSphere: (json) => Float64Array; box: (dx, dy, dz) => string; centerOfMass: (json) => Float64Array; chamfer: (json, edge_indices, distance1, distance2) => string; chamferReportJson: (json, edge_indices, distance1, distance2) => string; checkBsplineRestrictions: (json, max_degree, max_segments, tolerance) => number; circularPattern: (json, axis_x, axis_y, axis_z, center_x, center_y, center_z, count) => string; classifyPoint: (json, x, y, z, tolerance) => number; classifyShells: (documents) => string[]; clone: (json) => string; collapseCollinearDefaultTolerance: () => number; collapseCollinearVertices: (json, tolerance) => string; cone: (bottom_radius, top_radius, height) => string; containsPoint: (json, x, y, z, include_boundary) => boolean; convertDefaultTolerance: () => number; convertEdgesToElementary: (json, tolerance) => string; convertToBspline: (json) => string; convertToElementary: (json, tolerance) => string; cornerChamfer: (json, vertex_index, distance) => string; cornerFillet: (json, vertex_index, radius, sphere_center_mode) => string; cornerFilletSetback: (json, vertex_index, radius, sphere_center_mode, setback) => string; crossSection: (json, first_face, second_face, seed_region) => Float64Array; crossSectionCurves: (json, first_face, second_face, seed_region) => string; cylinder: (radius, height) => string; distanceTo: (json, x, y, z) => Float64Array; divideClosedFaces: (json) => string; draftFaces: (json, face_indices, pull_x, pull_y, pull_z, angle, neutral_x, neutral_y, neutral_z) => string; dump: (json) => string; edgeForms: (json) => string; edgeFormsJson: (json) => string; edgeInteriorPointsJson: (document) => string; edgeRange: (json, edge_index) => Float64Array; edgeRangesJson: (document) => string; edgeToFaceMap: (json) => Uint32Array; edgeValue: (json, edge_index, t) => Float64Array; entityCounts: (...args) => Uint32Array; eulerCharacteristic: (json) => number; extrude: (outer, holes_json, dx, dy, dz) => string; extrudeProfile: (profile_json, holes_json, dx, dy, dz) => string; faceArea: (json, face_index, eps) => number; faceCentroid: (json, face_index) => Float64Array; faceContainsPoint: (json, face_index, x, y, z, tolerance, include_boundary) => boolean; faceDocument: (json, face_index) => string; faceDomain: (json, face_index) => Float64Array; faceForms: (json) => string; faceFormsJson: (...args) => string; faceFromLoop: (points, holes_json, tolerance) => string; faceFromSurface: (surface_json, bounds, reversed, tolerance) => string; faceFromSurfaceWithLoops: (surface_json, loops_json, reversed, tolerance) => string; faceLoopPoints: (json) => string; faceLoops: (json, tolerance) => string; faceModifyShape: (json, face_index, constraints_json) => string; faceOffset: (json, face_index, distance, tolerance) => string; faceOutwardNormal: (...args) => Float64Array; facePlanar: (points, tolerance) => string; facePlanarWithHoles: (points, holes_json, tolerance) => string; faceProject: (json, face_index, x, y, z) => Float64Array; faceRectangle: (width, height, tolerance) => string; faceSplitByLoops: (json, loops_json, tolerance) => string; faceSummary: (json) => Uint32Array; faceThicken: (json, face_index, thickness, symmetric) => string; faceTrim: (json, face_index, tool_json, tool_face_index, side) => string; faceTrimByLoop: (json, face_index, loop_points, side, tolerance) => string; faceValue: (...args) => Float64Array; fillet: (json, edge_indices, law_kind, law_params) => string; filletReportJson: (json, edge_indices, law_kind, law_params) => string; filterCircularEdges: (json) => Uint32Array; filterConcaveEdges: (json) => Uint32Array; filterConvexEdges: (json) => Uint32Array; filterLinearEdges: (json) => Uint32Array; fix: (json, config) => Float64Array; fixSplitCommonVertex: (json) => string; fixWireframe: (json, tolerance) => string; freeEdgeCount: (json) => number; fromFaces: (documents_json, tolerance) => string; gridPattern: (json, x_axis, y_axis, spacing_x, spacing_y, count_x, count_y) => string; helix: (outer, holes_json, radius, pitch, turns, clockwise, origin, axis, segments_per_turn) => string; imprint: (json_a, json_b) => string; intersect: (json_a, json_b) => string; isClosed: (...args) => boolean; isValidCheap: (json) => boolean; linearPattern: (json, dx, dy, dz, spacing, count) => string; loft: (profiles_json, ruled, closed) => string; loopRegularPolygon: (radius, sides) => Float64Array; massProperties: (json, eps) => Float64Array; measurementDefaultEps: () => number; measurementDeflection: (json) => number; mirror: (...args) => string; normalizeEdgeParameterFlags: (json) => string; offset: (json, distance) => string; outerShellDocument: (json) => string; pipe: (outer, holes_json, path_json, guide_json) => string; pullFace: (json, face_index, distance) => string; recognizeHoles: (json) => Float64Array; removeInternalLoops: (json) => string; restrictionDefaultOptions: () => Float64Array; reverse: (json) => string; revolve: (outer, holes_json, axis_point, axis_direction, angle) => string; section: (json, normal_x, normal_y, normal_z, point_x, point_y, point_z) => string; sew: (json, tolerance) => string; shell: (json, thickness, open_face_indices) => string; signedVolume: (json, eps) => number; solidEntityCounts: (json) => Uint32Array; sphere: (radius) => string; splitByLoops: (json, loops_json, tolerance) => string; splitByPlane: (json, normal_x, normal_y, normal_z, point_x, point_y, point_z) => string; splitC0BsplineEdges: (json) => string; splitSelfIntersectingInnerLoops: (json) => string; subtract: (json_a, json_b) => string; surfaceArea: (json, eps) => number; surfaceCross: (first_json, second_json, seed_region) => string; surfaceCrossCurves: (first_json, second_json, seed_region) => string; sweep: (outer, holes_json, path_json, ruled, segments) => string; sweepProfile: (profile_json, holes_json, path_json, ruled, segments) => string; tessellate: (document, deflection?) => TriangleMesh; thicken: (json, thickness, symmetric, tolerance) => string; thickOffset: (json, distance, excluded_face_indices) => string; torus: (major_radius, minor_radius) => string; transform: (...args) => string; translate: (json, dx, dy, dz) => string; unifyDefaultOptions: () => Float64Array; unifySameDomain: (json, unify_faces, unify_edges, linear_tolerance, angular_tolerance) => string; union: (json_a, json_b) => string; validate: (document, toleranceScale, disabled) => ValidationReport; validateOuterShell: (document, toleranceScale, disabled) => ValidationReport; vertexPositions: (...args) => Float64Array; voidShellDocuments: (json) => string; volume: (json, eps) => number; }

analyticSection#

analyticSection: (json, first_face, second_face, seed_region) => Float64Array = wasm.brep_analytic_section

The plane x plane closed-form section between two faces of a solid, clipped to seed_region ([minX, minY, minZ, maxX, maxY, maxZ]).

Returns a flat packet: [lineCount, then per line: t0, t1, x0,y0,z0, x1,y1,z1, u0,v0 on first, u1,v1 on first, u0,v0 on second, u1,v1 on second]. An empty result ([0]) means the planes are parallel or miss the box; the export ERRORS where the TypeScript returns null, since "not a plane pair" is a caller mistake here rather than a dispatch step.

Parameters#

json#

string

first_face#

number

second_face#

number

seed_region#

Float64Array

Returns#

Float64Array

analyzeTolerances#

analyzeTolerances: (json) => Float64Array = wasm.brep_analyze_tolerances

[vertexCount, minTolerance, maxTolerance, averageTolerance] over the OUTER shell, which is the shell Solid.analyzeTolerances passes.

Parameters#

json#

string

Returns#

Float64Array

boundingBox#

boundingBox: (json) => Float64Array = wasm.brep_bounding_box

[minX, minY, minZ, maxX, maxY, maxZ]. An empty face set gives the empty box, which reads back +Infinity mins and -Infinity maxes exactly as BoundingBox.fromPoints([]) does.

Parameters#

json#

string

Returns#

Float64Array

boundingSphere#

boundingSphere: (json) => Float64Array = wasm.brep_bounding_sphere

[centerX, centerY, centerZ, radius].

Parameters#

json#

string

Returns#

Float64Array

box#

box: (dx, dy, dz) => string = wasm.brep_box

Parameters#

dx#

number

dy#

number

dz#

number

Returns#

string

centerOfMass#

centerOfMass: (json) => Float64Array = wasm.brep_center_of_mass

[x, y, z].

Parameters#

json#

string

Returns#

Float64Array

chamfer#

chamfer: (json, edge_indices, distance1, distance2) => string = wasm.brep_chamfer

Solid.chamfer(distance1, edges?, distance2?) — the chamfered solid, as a fresh handle.

An EMPTY edge_indices is the TypeScript's omitted edges, which selects every edge — and on an origin AABB box with equal distances that is the closed-form all-12-edge path (OCCT MakeChamfer topology: 26 faces, 48 edges, 24 vertices).

Same CONTRACT change as [brep_fillet]: an edge that does not cut is an error naming it, not a silently untouched solid.

Parameters#

json#

string

edge_indices#

Uint32Array

distance1#

number

distance2#

number

Returns#

string

chamferReportJson#

chamferReportJson: (json, edge_indices, distance1, distance2) => string = wasm.brep_chamfer_report_json

Solid.chamferReport(...) — the counts and the per-edge outcome, as JSON.

Parameters#

json#

string

edge_indices#

Uint32Array

distance1#

number

distance2#

number

Returns#

string

checkBsplineRestrictions#

checkBsplineRestrictions: (json, max_degree, max_segments, tolerance) => number = wasm.brep_check_bspline_restrictions

Count nurbs carriers exceeding the degree / segment limits.

Parameters#

json#

string

max_degree#

number

max_segments#

number

tolerance#

number

Returns#

number

circularPattern#

circularPattern: (json, axis_x, axis_y, axis_z, center_x, center_y, center_z, count) => string = wasm.brep_circular_pattern

Parameters#

json#

string

axis_x#

number

axis_y#

number

axis_z#

number

center_x#

number

center_y#

number

center_z#

number

count#

number

Returns#

string

classifyPoint#

classifyPoint: (json, x, y, z, tolerance) => number = wasm.brep_classify_point

0 = inside, 1 = outside, 2 = on-boundary — the ordering of the TypeScript union 'inside' | 'outside' | 'on-boundary'.

Parameters#

json#

string

x#

number

y#

number

z#

number

tolerance#

number

Returns#

number

classifyShells#

classifyShells: (documents) => string[] = wasm.brep_classify_shells

classifyShellsToBodies — N one-shell BrepJson documents in, one solid-root BrepJson document per body out.

Documents rather than handles, because containment is decided by point tests that cannot cross stores: every shell is read into ONE arena here.

Parameters#

documents#

string[]

Returns#

string[]

clone#

clone: (json) => string = wasm.brep_clone

Parameters#

json#

string

Returns#

string

collapseCollinearDefaultTolerance#

collapseCollinearDefaultTolerance: () => number = wasm.brep_collapse_collinear_default_tolerance

The default collapseCollinearVertices band.

Returns#

number

collapseCollinearVertices#

collapseCollinearVertices: (json, tolerance) => string = wasm.brep_collapse_collinear_vertices

Collapse runs of collinear boundary vertices. Returns the collapsed count.

Parameters#

json#

string

tolerance#

number

Returns#

string

cone#

cone: (bottom_radius, top_radius, height) => string = wasm.brep_cone

Parameters#

bottom_radius#

number

top_radius#

number

height#

number

Returns#

string

containsPoint#

containsPoint: (json, x, y, z, include_boundary) => boolean = wasm.brep_contains_point

Parameters#

json#

string

x#

number

y#

number

z#

number

include_boundary#

boolean

Returns#

boolean

convertDefaultTolerance#

convertDefaultTolerance: () => number = wasm.brep_convert_default_tolerance

The default recognition band both elementary conversions take.

Returns#

number

convertEdgesToElementary#

convertEdgesToElementary: (json, tolerance) => string = wasm.brep_convert_edges_to_elementary

The same for nurbs EDGE carriers.

Parameters#

json#

string

tolerance#

number

Returns#

string

convertToBspline#

convertToBspline: (json) => string = wasm.brep_convert_to_bspline

Convert every analytic face and edge carrier to an equivalent nurbs (B-spline) carrier. Returns the count of converted entities.

Parameters#

json#

string

Returns#

string

convertToElementary#

convertToElementary: (json, tolerance) => string = wasm.brep_convert_to_elementary

Recognize nurbs FACE carriers that are exactly an analytic primitive and convert them back within tolerance. Returns the count converted.

Parameters#

json#

string

tolerance#

number

Returns#

string

cornerChamfer#

cornerChamfer: (json, vertex_index, distance) => string = wasm.brep_corner_chamfer

Solid.cornerChamfer(vertex, distance) — the corner-cut solid, as a fresh handle. The vertex index is the one [brep_corner_fillet] documents.

Parameters#

json#

string

vertex_index#

number

distance#

number

Returns#

string

cornerFillet#

cornerFillet: (json, vertex_index, radius, sphere_center_mode) => string = wasm.brep_corner_fillet

Solid.cornerFillet(vertex, radius, options?) — the corner-rounded solid, as a fresh handle.

The vertex is an INDEX into solid.vertices(), the order brep_vertex_positions flattens, so a caller reads the positions, picks the corner it wants, and hands the index back — the same convention [brep_fillet] uses for edges.

sphere_center_mode is the TypeScript's options.sphereCenter, whose two spellings are its whole domain: 0 = edge-tangent (the TS default), 1 = face-tangent. A string cannot cross the boundary as cheaply as the discriminant, and an unknown value is rejected rather than defaulted.

Parameters#

json#

string

vertex_index#

number

radius#

number

sphere_center_mode#

number

Returns#

string

cornerFilletSetback#

cornerFilletSetback: (json, vertex_index, radius, sphere_center_mode, setback) => string = wasm.brep_corner_fillet_setback

Solid.cornerFillet with an explicit contact setback smaller than the default radius-derived distance. Same vertex index and sphere-centre mode as [brep_corner_fillet].

Parameters#

json#

string

vertex_index#

number

radius#

number

sphere_center_mode#

number

setback#

number

Returns#

string

crossSection#

crossSection: (json, first_face, second_face, seed_region) => Float64Array = wasm.brep_cross_section

The six-pair section dispatcher (cross::surface_cross) between two faces of one solid, so the parity suite can drive the whole intersection stack.

Returns a flat packet: [branchCount, contactCount, then per branch: kind, closed, t0, t1, and eleven sampled 3D points at even fractions of the range, then per contact: x, y, z]. kind is the CrossLineKind ordinal (0 line, 1 circle, 2 ellipse, 3 parabola, 4 hyperbola, 5 nurbs).

Parameters#

json#

string

first_face#

number

second_face#

number

seed_region#

Float64Array

Returns#

Float64Array

crossSectionCurves#

crossSectionCurves: (json, first_face, second_face, seed_region) => string = wasm.brep_cross_section_curves

The three-path section between two faces of a registered solid, as CURVES.

Same dispatcher and same seed region as brep_cross_section; the difference is only what crosses. Returns a JSON array of {kind, closed, curveJson, t0, t1}, one entry per branch, in the intersector's own order. Isolated contact POINTS are not in this array — they are not curves — and brep_cross_section still reports them.

Parameters#

json#

string

first_face#

number

second_face#

number

seed_region#

Float64Array

Returns#

string

cylinder#

cylinder: (radius, height) => string = wasm.brep_cylinder

Parameters#

radius#

number

height#

number

Returns#

string

distanceTo#

distanceTo: (json, x, y, z) => Float64Array = wasm.brep_distance_to

[distance, queryX, queryY, queryZ, boundaryX, boundaryY, boundaryZ] — pointOnA is the query itself, pointOnB the closest boundary point.

Parameters#

json#

string

x#

number

y#

number

z#

number

Returns#

Float64Array

divideClosedFaces#

divideClosedFaces: (json) => string = wasm.brep_divide_closed_faces

Cut U-periodic faces that belt the period (ShapeUpgrade_ClosedFaceDivide). Returns the divided-face count.

Parameters#

json#

string

Returns#

string

draftFaces#

draftFaces: (json, face_indices, pull_x, pull_y, pull_z, angle, neutral_x, neutral_y, neutral_z) => string = wasm.brep_draft_faces

Taper the selected PLANAR faces by angle radians about the neutral plane through neutral_* with normal pull_*. Returns a fresh handle.

Parameters#

json#

string

face_indices#

Uint32Array

pull_x#

number

pull_y#

number

pull_z#

number

angle#

number

neutral_x#

number

neutral_y#

number

neutral_z#

number

Returns#

string

dump#

readonly dump: (json) => string = wasm.brep_shell_dump

Read a one-shell BrepJson document into a fresh handle. Write a shell handle back out as the same one-shell BrepJson document [brep_shell_load] reads.

The uv_curve rows go through the writer's CARRIER path, so what comes back is the uv_curve itself rather than an interpolation through samples of it, and a carrier that had to be fitted declares the deviation it measured on its own edge and face. That is what makes the round trip closed: dump → load → dump is byte-identical, because the second write has nothing left to widen.

Parameters#

json#

string

Returns#

string

edgeForms#

edgeForms: (json) => string = wasm.brep_edge_forms

The analytic form tag of each edge's carrier, in edge order.

Parameters#

json#

string

Returns#

string

edgeFormsJson#

edgeFormsJson: (json) => string = wasm.brep_edge_forms_json

The exact analytic descriptor of every EDGE carrier, as a JSON array in edge order — one CurveJson row per edge, null where the carrier holds no form (or holds a parabola/hyperbola, which the wire enum does not name).

Parameters#

json#

string

Returns#

string

edgeInteriorPointsJson#

edgeInteriorPointsJson: (document) => string

Parametric midpoint of every edge as JSON [[x, y, z], …].

Parameters#

document#

string

Returns#

string

edgeRange#

edgeRange: (json, edge_index) => Float64Array = wasm.brep_edge_range

curve.range() of one edge.

Parameters#

json#

string

edge_index#

number

Returns#

Float64Array

edgeRangesJson#

edgeRangesJson: (document) => string

Every edge's curve.range() as JSON [[t0, t1], …] — published wasm has no brep_edge_ranges_json; this is the per-edge probe in document order (same contract as crates/geometry/src/brep/wasm/geometric_probes.rs).

Parameters#

document#

string

Returns#

string

edgeToFaceMap#

edgeToFaceMap: (json) => Uint32Array = wasm.brep_edge_to_face_map

Run-length packing of Map<Edge, Face[]>: [edgeIndex, faceCount, faceIndex…] repeated, edges ascending. A two-manifold solid gives a faceCount of 2 for every edge.

Parameters#

json#

string

Returns#

Uint32Array

edgeValue#

edgeValue: (json, edge_index, t) => Float64Array = wasm.brep_edge_value

curve.value(t) of one edge, indexed in the solid's edge order. t is the carrier's OWN parameter — the knot domain for a form carrier, [0, 1] for a plain nurbs.

Parameters#

json#

string

edge_index#

number

t#

number

Returns#

Float64Array

entityCounts#

readonly entityCounts: (...args) => Uint32Array

Parameters#

args#

...[string]

Returns#

Uint32Array

eulerCharacteristic#

eulerCharacteristic: (json) => number = wasm.brep_euler_characteristic

Genus-correct Euler characteristic V − E + F − R.

Parameters#

json#

string

Returns#

number

extrude#

extrude: (outer, holes_json, dx, dy, dz) => string = wasm.brep_extrude

Extrude a planar profile polygon along a direction vector, whose LENGTH is the extrusion height. Holes in the profile become through-holes.

Parameters#

outer#

Float64Array

holes_json#

string

dx#

number

dy#

number

dz#

number

Returns#

string

extrudeProfile#

extrudeProfile: (profile_json, holes_json, dx, dy, dz) => string = wasm.brep_extrude_profile

Extrude a planar profile bounded by CURVES along a direction vector, whose LENGTH is the extrusion height. Holes in the profile become through-holes.

profile_json is the outer boundary ring — a JSON array of NurbsCurve documents in traversal order, one per boundary edge (a circle is a one-element ring). holes_json is a JSON array of such rings, or empty.

Parameters#

profile_json#

string

holes_json#

string

dx#

number

dy#

number

dz#

number

Returns#

string

faceArea#

faceArea: (json, face_index, eps) => number = wasm.brep_face_area

Area of ONE face, indexed in the solid's face order (solid.faces(), the order brep_face_value and brep_face_forms already use). Summing this over every face reproduces [brep_surface_area] exactly — it is the same term.

Parameters#

json#

string

face_index#

number

eps#

number

Returns#

number

faceCentroid#

faceCentroid: (json, face_index) => Float64Array = wasm.brep_face_centroid

[x, y, z] — the AREA centroid of one face, (1/A)·∫ x dA over its trimmed domain. Holes subtract, so an annular cap reports the centroid of the material it actually covers.

The tessellation deflection for the one rule that needs a mesh (a face whose uv boundary will not close) is the solid's own [brep_measurement_deflection], not a caller knob: the same face measured through brep_center_of_mass uses that value, and the two must not disagree.

Parameters#

json#

string

face_index#

number

Returns#

Float64Array

faceContainsPoint#

faceContainsPoint: (json, face_index, x, y, z, tolerance, include_boundary) => boolean = wasm.brep_face_contains_point

True when the point lies on the trimmed face: within tolerance of the face's CARRIER and inside its trim. include_boundary decides the trim boundary itself; the carrier band is always tolerance, since a point off the surface is not on the face under any reading.

Parameters#

json#

string

face_index#

number

x#

number

y#

number

z#

number

tolerance#

number

include_boundary#

boolean

Returns#

boolean

faceDocument#

readonly faceDocument: (json, face_index) => string = wasm.brep_shell_face_document

Hand ONE face of a registered shell out as its OWN one-shell version-2 document — the same BrepJson [brep_shell_load] reads, holding that face, its outer loop and holes, and only the edges and vertices those loops reference.

The rows are COPIES, re-indexed into a fresh table set because the face is copied into a private arena first ([copy_faces_into], which keeps edges a loop uses twice shared) and the writer emits only what is reachable from the shell it is given. So the document owns every row it names, and the source handle keeps its own geometry — this reads, it does not consume. It is what parashape's faceEntityOf emits as { brep: oneFaceShell.toJSON() } (packages/parametric/src/domains/brepFace.ts).

face_index is a POSITION in shell.faces, like [brep_shell_face_value], and arrives as f64 because that is the number the TypeScript hands over.

Parameters#

json#

string

face_index#

number

Returns#

string

faceDomain#

faceDomain: (json, face_index) => Float64Array = wasm.brep_face_domain

[uMin, uMax, vMin, vMax] of one face's carrier — the domain its own value is defined over, which a probe has to stay inside.

Parameters#

json#

string

face_index#

number

Returns#

Float64Array

faceForms#

faceForms: (json) => string = wasm.brep_face_forms

The analytic form tag of each face's carrier, as a JSON array of names ("plane" / "cylinder" / "cone" / "sphere" / "torus" / "none"), in face order. This is the recognition METADATA, not a dispatch key: evaluation stays generic NURBS eval on both sides.

Parameters#

json#

string

Returns#

string

faceFormsJson#

readonly faceFormsJson: (...args) => string

Parameters#

args#

...[string]

Returns#

string

faceFromLoop#

faceFromLoop: (points, holes_json, tolerance) => string = wasm.brep_face_from_loop

Face.fromLoop with INNER LOOPS — the exact constructor, and the only path here that will take holes without touching them.

Face.fromLoop (topo/Face.ts) does two things and no more: it fits the supporting plane from the OUTER loop by Newell, and it hands surface and loop to the Face constructor (topo/Face.ts), which stores innerLoops verbatim. So this export does not clean the rings, does not re-wind them, does not check them coplanar and does not check that a hole nests inside the boundary — the caller's points ARE the loops, and a caller that wants those checks wants [brep_face_planar_with_holes] instead.

It also reproduces Face.fromLoop's FRAME, which is the other half of the difference from the holes path: the plane comes from Store::face_planar, so the uv origin sits at the core Plane's canonical origin (the plane point nearest the world origin) rather than at the first boundary point, and no uv_curves are recorded at all. See [brep_face_planar], which spells out what a caller sampling brep_shell_face_value sees when those two are confused.

holes_json is a JSON array of flat [x, y, z, ...] arrays, the same wire shape every other loop argument here takes.

Parameters#

points#

Float64Array

holes_json#

string

tolerance#

number

Returns#

string

faceFromSurface#

faceFromSurface: (surface_json, bounds, reversed, tolerance) => string = wasm.brep_face_from_surface

Face.fromSurface — a face on a general (nurbs or form-tagged) surface carrier, over its natural bounds.

This is the NATURAL-BOUNDS spelling — the whole of OCCT MakeFace(surface, UMin, UMax, VMin, VMax). For the TypeScript's caller-supplied boundary loops see [brep_face_from_surface_with_loops], which carries them as the points the rest of this boundary already spells a loop in.

bounds is [uMin, uMax, vMin, vMax], or empty for the surface's own domain.

Parameters#

surface_json#

string

bounds#

Float64Array

reversed#

boolean

tolerance#

number

Returns#

string

faceFromSurfaceWithLoops#

faceFromSurfaceWithLoops: (surface_json, loops_json, reversed, tolerance) => string = wasm.brep_face_from_surface_with_loops

Face.fromSurface(surface, loops) — a face on a general surface carrier BOUNDED by caller-supplied loops, loops_json being [outer, ...holes] as a JSON array of flat [x, y, z, ...] rings.

That wire shape is the one every loop on this boundary already takes (brep_face_planar_with_holes, both split_by_loops): a loop gets no handle because both of Loop's factories build the same closed chain of straight edges through a point list, so the points ARE the loop. It also collapses the TypeScript's Loop[] | { outer, holes? } union, which is two spellings of one list whose first element is the outer loop.

Every loop vertex must lie on the surface within max(tolerance, 1e-6); make_face_from_surface refuses one that does not, rather than projecting it silently. An EMPTY list is refused here too — that is [brep_face_from_surface]'s construction, and answering it from this export would make one call mean two different faces.

Parameters#

surface_json#

string

loops_json#

string

reversed#

boolean

tolerance#

number

Returns#

string

faceLoopPoints#

faceLoopPoints: (json) => string = wasm.brep_face_loop_points

The outer-loop boundary points of every face, as JSON [[[x, y, z], ...], ...] indexed the same way every export in this file selects faces.

Selection is geometric: a caller picks "the four walls" or "the pocket's floor" by measuring, and the existing boundary can only be read one vertex table at a time, which does not say which face a vertex belongs to. This is the smallest reader that makes an index selection derivable, and it is JSON for the reason the rest of the structural summaries are: the shape is ragged (a face has as many boundary points as it has edges) and small.

Parameters#

json#

string

Returns#

string

faceLoops#

readonly faceLoops: (json, tolerance) => string = wasm.brep_shell_face_loops

Per-face boundary loops of a registered shell — outer first, then holes — each loop a flat [x, y, z, ...] point list, curved edges chord-subdivided until they sit within tolerance of their chord.

The JSON is Point[][][]: one array per face in the shell's own face order, one flat point list per loop. This is eachFaceLoops (brepFace.ts) over faceToLoops (brepFace.ts), including its filter — a loop that comes back with fewer than three points is not a polygon and is dropped, so a face's loop count here is not necessarily 1 + innerLoops.len().

Parameters#

json#

string

tolerance#

number

Returns#

string

faceModifyShape#

faceModifyShape: (json, face_index, constraints_json) => string = wasm.brep_face_modify_shape

Face.modifyShape — Hu et al. shape modification on a FREEFORM face, under the geometric constraints in constraints_json. Answers a one-face shell handle; the source is not touched.

constraints_json is the ShapeModifyOptions record: { "method": "controlNet" | "energy", "points": [{ "u": .., "v": .., "target": [x, y, z], "normal": [x, y, z] }], "isoCurves": [{ "direction": "u" | "v", "parameter": .., "curve": { .. } }], "energyRegularization": .. }.

DIVERGENCE (an argument that does nothing). The TypeScript option record also carries energySamplesPerSpan, and it is INERT there: assembleEnergyMatrix clamps it, slices the Gauss node and weight tables to that length, and then integrates with the full six-point rule anyway — its own comment says "use all 6 always for accuracy". It is therefore absent from this record rather than accepted and ignored.

Parameters#

json#

string

face_index#

number

constraints_json#

string

Returns#

string

faceOffset#

faceOffset: (json, face_index, distance, tolerance) => string = wasm.brep_face_offset

Face.offset — the face-level surface offset. Answers a one-face shell handle.

Parameters#

json#

string

face_index#

number

distance#

number

tolerance#

number

Returns#

string

faceOutwardNormal#

readonly faceOutwardNormal: (...args) => Float64Array

Parameters#

args#

...[string, number, number, number]

Returns#

Float64Array

facePlanar#

facePlanar: (points, tolerance) => string = wasm.brep_face_planar

A planar face on the plane its own boundary fits.

This one export is Face.planar AND Face.fromLoop(Loop.fromPolygon(...)), which the TypeScript defines as each other. The supporting plane is fitted from the boundary by Newell, so the outward normal follows the CALLER'S POINT ORDER — reverse the points and the face faces the other way. That is deliberate and is why brep_shell_from_faces re-orients what it sews.

It is Store::face_planar and NOT make_planar_face, which are two different functions on both sides and disagree about one thing a caller can see: where the carrier's uv ORIGIN sits. Face.planar pins it at the core Plane's own canonical origin (the plane point nearest the world origin), while makePlanarFace — the holes path below — pins it at the first boundary point. They also disagree about a SECOND, bigger thing: this path records NO uv_curves at all (faithful — TS Face.fromLoop adds none, topo/Face.ts), while the holes path records one linear uv_curve per boundary edge. So "self-consistent with the uv_curves they record" is true only vacuously here: a caller reading a uv boundary off a brep_face_planar face gets nothing. A caller sampling brep_shell_face_value also sees the origin difference — routing this export through the holes path once put Face.rectangle(4, 3)'s uv origin 2.5 units off the TypeScript's.

Parameters#

points#

Float64Array

tolerance#

number

Returns#

string

facePlanarWithHoles#

facePlanarWithHoles: (points, holes_json, tolerance) => string = wasm.brep_face_planar_with_holes

A planar face with hole loops — the makePlanarFace path, whose extra work over [brep_face_planar] is exactly what holes need: the loops are cleaned, checked coplanar, re-wound (outer counter-clockwise about the outward normal, holes clockwise) and checked to nest. holes_json is a JSON array of flat [x, y, z, ...] arrays.

Parameters#

points#

Float64Array

holes_json#

string

tolerance#

number

Returns#

string

faceProject#

faceProject: (json, face_index, x, y, z) => Float64Array = wasm.brep_face_project

surface.project(point) of one face — the carrier's own inverse. Pairs with [brep_face_value] for the round-trip a form tag has to satisfy: a form whose axis points the wrong way describes the same point set with its parameters mirrored, so value and project disagree while every cross-side comparison still passes.

Parameters#

json#

string

face_index#

number

x#

number

y#

number

z#

number

Returns#

Float64Array

faceRectangle#

faceRectangle: (width, height, tolerance) => string = wasm.brep_face_rectangle

A rectangular planar face on the XY plane centred at the origin, width along x and height along y, outward normal +Z.

Parameters#

width#

number

height#

number

tolerance#

number

Returns#

string

faceSplitByLoops#

faceSplitByLoops: (json, loops_json, tolerance) => string = wasm.brep_face_split_by_loops

Split the ONE face of a shell handle by cutting loops that lie on its surface, returning the pieces as a new shell handle. Closed loops cut regions; open loops running boundary to boundary walk the face into pieces.

Parameters#

json#

string

loops_json#

string

tolerance#

number

Returns#

string

faceSummary#

faceSummary: (json) => Uint32Array = wasm.brep_face_summary

Per-face [reversed, loopCount, edgeCount], flattened in face order.

Parameters#

json#

string

Returns#

Uint32Array

faceThicken#

faceThicken: (json, face_index, thickness, symmetric) => string = wasm.brep_face_thicken

Face.thicken — extrude a face along its own outward normal into a slab. Answers a SOLID handle, since the result is a solid.

Parameters#

json#

string

face_index#

number

thickness#

number

symmetric#

boolean

Returns#

string

faceTrim#

faceTrim: (json, face_index, tool_json, tool_face_index, side) => string = wasm.brep_face_trim

Face.trim — keep the part of a face inside a co-surface tool face (side == true) or cut the tool out of it (side == false). Both operands are one-face shell handles; the result is a shell of the surviving pieces.

Parameters#

json#

string

face_index#

number

tool_json#

string

tool_face_index#

number

side#

boolean

Returns#

string

faceTrimByLoop#

faceTrimByLoop: (json, face_index, loop_points, side, tolerance) => string = wasm.brep_face_trim_by_loop

Face.trim with a LOOP tool — the TypeScript's tool instanceof Face test taking its other alternative, where a closed loop lying on the face's own surface becomes the tool face.

DIVERGENCE (spelling). TS carries the two tools as one Face | Loop union argument; a boundary has no union, so each alternative is its own export. loop_points is one flat [x, y, z, ...] ring, the shape brep_face_planar takes, closed implicitly.

The loop is materialized at tolerance and then turned into a tool face at the SUBJECT's own tolerance, which is what trimFace does when it calls loopAsFaceOnSurface(tool, face.surface, face.tolerance).

Parameters#

json#

string

face_index#

number

loop_points#

Float64Array

side#

boolean

tolerance#

number

Returns#

string

faceValue#

readonly faceValue: (...args) => Float64Array

Parameters#

args#

...[string, number, number, number]

Returns#

Float64Array

fillet#

fillet: (json, edge_indices, law_kind, law_params) => string = wasm.brep_fillet

Solid.fillet(edges, radius) — the filleted solid, as a fresh handle.

CONTRACT (changed): an edge that does not blend is an ERROR here, and the message names every such edge. It used to come back as the original solid with the reasons in a report this function dropped, so "the fillet did nothing" and "the shape needed no change" were the same answer. Use [brep_fillet_report_json] for the per-edge outcome of a partial run.

Parameters#

json#

string

edge_indices#

Uint32Array

law_kind#

number

law_params#

Float64Array

Returns#

string

filletReportJson#

filletReportJson: (json, edge_indices, law_kind, law_params) => string = wasm.brep_fillet_report_json

Solid.filletReport(edges, radius) — the counts and the per-edge outcome, as JSON. The solid itself is NOT registered here; call [brep_fillet] for that.

Parameters#

json#

string

edge_indices#

Uint32Array

law_kind#

number

law_params#

Float64Array

Returns#

string

filterCircularEdges#

filterCircularEdges: (json) => Uint32Array = wasm.brep_filter_circular_edges

Edge indices whose carrier is a full circle.

Parameters#

json#

string

Returns#

Uint32Array

filterConcaveEdges#

filterConcaveEdges: (json) => Uint32Array = wasm.brep_filter_concave_edges

Manifold edge indices whose oriented dihedral is a concave crease.

Parameters#

json#

string

Returns#

Uint32Array

filterConvexEdges#

filterConvexEdges: (json) => Uint32Array = wasm.brep_filter_convex_edges

Manifold edge indices whose oriented dihedral is a convex crease.

Parameters#

json#

string

Returns#

Uint32Array

filterLinearEdges#

filterLinearEdges: (json) => Uint32Array = wasm.brep_filter_linear_edges

Edge indices whose carrier is a straight line segment.

Parameters#

json#

string

Returns#

Uint32Array

fix#

fix: (json, config) => Float64Array = wasm.brep_fix

Run the shape-fix hierarchy in place. config is the JSON of a partial FixConfig ({} for the defaults, {"fixOrientation":"on"} to force one), which is what the TypeScript's Partial<FixConfig> argument is. Returns [status, actionsApplied].

Every advertised On/Auto flag runs the matching OCCT-named repair, or errors. Nine flags default to off. Degenerated / Reversed2d / AddCurve3d / Shifted run as OCCT FixEdgeCurves + FixDegenerated defaults (auto). LoopWire / SplitFace / PeriodicDegenerated default auto (Face::Perform).

Parameters#

json#

string

config#

string

Returns#

Float64Array

fixSplitCommonVertex#

fixSplitCommonVertex: (json) => string = wasm.brep_fix_split_common_vertex

Split vertices shared by non-adjacent edge fans, returning the split count.

Parameters#

json#

string

Returns#

string

fixWireframe#

fixWireframe: (json, tolerance) => string = wasm.brep_fix_wireframe

Fix wireframe gaps below tolerance, returning the sewn pair count.

Parameters#

json#

string

tolerance#

number

Returns#

string

freeEdgeCount#

freeEdgeCount: (json) => number = wasm.brep_free_edge_count

Free (singly-bordered) edges of the solid's OUTER shell — the edge-use census Solid.outerShell.manifoldReport().freeEdges reports, and 0 exactly when that shell sews watertight.

The TypeScript callers all read this count through .freeEdges.filter((edge) => !edge.degenerate), and the filter is not repeated here because [crate::brep::topo::arena::Store::shell_manifold_report] already exempts degenerate edges at the source: a pole row or a cone apex is a whole parameter range squeezed onto one point, appears once in its face's loop, and bounds nothing.

Parameters#

json#

string

Returns#

number

fromFaces#

readonly fromFaces: (documents_json, tolerance) => string = wasm.brep_shell_from_faces

Sew loose faces into one shell, ORIENTING it when the weld closes.

handles are shell handles whose faces are all taken; the operands stay valid, because each is transplanted through the version-2 round trip rather than moved — this crate's only store-to-store transfer, and the same one the boolean uses for its second operand.

tolerance of 0 or less means "the default sew band", matching the TS optional argument.

Parameters#

documents_json#

string

tolerance#

number

Returns#

string

gridPattern#

gridPattern: (json, x_axis, y_axis, spacing_x, spacing_y, count_x, count_y) => string = wasm.brep_grid_pattern

Parameters#

json#

string

x_axis#

Float64Array

y_axis#

Float64Array

spacing_x#

number

spacing_y#

number

count_x#

number

count_y#

number

Returns#

string

helix#

helix: (outer, holes_json, radius, pitch, turns, clockwise, origin, axis, segments_per_turn) => string = wasm.brep_helix

Sweep a planar profile polygon along a helix.

Parameters#

outer#

Float64Array

holes_json#

string

radius#

number

pitch#

number

turns#

number

clockwise#

boolean

origin#

Float64Array

axis#

Float64Array

segments_per_turn#

number

Returns#

string

imprint#

imprint: (json_a, json_b) => string = wasm.brep_imprint

Imprint B's intersection trace onto A's faces, registering the result under a NEW handle and leaving both inputs valid.

The material is unchanged — same volume, same orientation — and only the face and edge structure is finer, so a caller can select or offset the sub-region B marks out. B is a stencil: it is never split and none of its faces survive. The operands are brought into one arena exactly as [boolean] does.

Parameters#

json_a#

string

json_b#

string

Returns#

string

intersect#

intersect: (json_a, json_b) => string = wasm.brep_boolean_intersect

Intersection (A n B): only the material common to both solids.

Parameters#

json_a#

string

json_b#

string

Returns#

string

isClosed#

readonly isClosed: (...args) => boolean

Parameters#

args#

...[string]

Returns#

boolean

isValidCheap#

isValidCheap: (json) => boolean = wasm.brep_is_valid_cheap

True when every shell of the solid is closed — the O(edges) validity screen Solid.isValidCheap runs before the geometric validate report.

Parameters#

json#

string

Returns#

boolean

linearPattern#

linearPattern: (json, dx, dy, dz, spacing, count) => string = wasm.brep_linear_pattern

Parameters#

json#

string

dx#

number

dy#

number

dz#

number

spacing#

number

count#

number

Returns#

string

loft#

loft: (profiles_json, ruled, closed) => string = wasm.brep_loft

Loft a stack of planar profile polygons into a solid.

profiles_json is a JSON array of point rings ([[[x, y, z], ...], ...]) — the profiles cross as polygons for the same reason a swept profile does. The bands are typed analytically per pair, so coaxial circular sections come back carrying a cylinder or cone rather than a generic ruled patch.

Parameters#

profiles_json#

string

ruled#

boolean

closed#

boolean

Returns#

string

loopRegularPolygon#

loopRegularPolygon: (radius, sides) => Float64Array = wasm.brep_loop_regular_polygon

The points of a regular polygon on the XY plane centred at the origin, first at (radius, 0, 0) and winding counter-clockwise seen from +Z.

A LOOP does not get a handle, because at this boundary it has nothing a handle would carry: both of Loop's factories build the same thing — a closed chain of straight edges through a point list — so the points ARE the loop, and every consumer here (brep_face_planar, the two split_by_loops) takes them as points and materializes the chain in the store it is working in. Loop.fromPolygon is therefore the identity on this side.

Parameters#

radius#

number

sides#

number

Returns#

Float64Array

massProperties#

massProperties: (json, eps) => Float64Array = wasm.brep_mass_properties

[volume, surfaceArea, comX, comY, comZ, i00, i01, i02, i10, i11, i12, i20, i21, i22] — the tensor in ROW order, matching the TS [[Ixx, -Ixy, -Ixz], [-Ixy, Iyy, -Iyz], [-Ixz, -Iyz, Izz]] layout.

Parameters#

json#

string

eps#

number

Returns#

Float64Array

measurementDefaultEps#

measurementDefaultEps: () => number = wasm.brep_measurement_default_eps

The relative stopping band Solid.volume / surfaceArea use when their caller passes no eps — DEFAULT_MEASUREMENT_EPS.

Returns#

number

measurementDeflection#

measurementDeflection: (json) => number = wasm.brep_measurement_deflection

Parameters#

json#

string

Returns#

number

mirror#

readonly mirror: (...args) => string

Parameters#

args#

...[string, number, number, number, number, number, number]

Returns#

string

normalizeEdgeParameterFlags#

normalizeEdgeParameterFlags: (json) => string = wasm.brep_normalize_edge_parameter_flags

Recompute every edge's degenerate / sameParameter / sameRange flags from the geometry. Returns the number of edges whose flags changed.

Parameters#

json#

string

Returns#

string

offset#

offset: (json, distance) => string = wasm.brep_offset

Offset every face by distance — positive outward, negative inward.

Parameters#

json#

string

distance#

number

Returns#

string

outerShellDocument#

outerShellDocument: (json) => string = wasm.brep_outer_shell_document

Hand a registered SOLID's OUTER shell out as its own one-shell version-2 document — the same BrepJson [brep_shell_load] reads.

The role is READ, not re-derived: Solid stores outer_shell separately from void_shells (topo/arena.rs), and classify_shells_to_bodies is what sorted them there by containment and winding.

This is what parashape's explode walk needs to reach a solid's boundary as a Shell handle without going through Shell.fromJSON on the TypeScript side (packages/parametric/src/domains/brepFace.ts).

Parameters#

json#

string

Returns#

string

pipe#

pipe: (outer, holes_json, path_json, guide_json) => string = wasm.brep_pipe

Pipe a planar profile polygon along a NURBS path, scaling the section by an optional guide rail (an empty guide_json means no guide).

Parameters#

outer#

Float64Array

holes_json#

string

path_json#

string

guide_json#

string

Returns#

string

pullFace#

pullFace: (json, face_index, distance) => string = wasm.brep_pull_face

Slide the selected face along its own outward normal by distance, sliding each boundary vertex along a foreign incident edge so the neighbourhood stays valid. Returns a fresh handle.

DIVERGENCE (return). The TypeScript mutates the receiver and answers void. Across this boundary the caller's handle names an arena it still owns, so the pull runs on a working COPY and the result is registered — a handle the caller already holds is what "in place" means here, and mutating the registered arena would edit a solid another call may be mid-way through.

Parameters#

json#

string

face_index#

number

distance#

number

Returns#

string

recognizeHoles#

recognizeHoles: (json) => Float64Array = wasm.brep_recognize_holes

Eight doubles per recognized hole: [faceIndex, axisX, axisY, axisZ, centerX, centerY, centerZ, radius, depth] — nine, and the face index is one because recognizeHoles emits exactly one face per hole.

Parameters#

json#

string

Returns#

Float64Array

removeInternalLoops#

removeInternalLoops: (json) => string = wasm.brep_remove_internal_loops

Strip every inner (hole) loop from every face. Returns the removed count.

Parameters#

json#

string

Returns#

string

restrictionDefaultOptions#

restrictionDefaultOptions: () => Float64Array = wasm.brep_restriction_default_options

[maxDegree, maxSegments, tolerance].

Returns#

Float64Array

reverse#

reverse: (json) => string = wasm.brep_reverse

Parameters#

json#

string

Returns#

string

revolve#

revolve: (outer, holes_json, axis_point, axis_direction, angle) => string = wasm.brep_revolve

Revolve a planar profile polygon about an axis. angle is in radians and must lie in (0, 2pi].

Parameters#

outer#

Float64Array

holes_json#

string

axis_point#

Float64Array

axis_direction#

Float64Array

angle#

number

Returns#

string

section#

section: (json, normal_x, normal_y, normal_z, point_x, point_y, point_z) => string = wasm.brep_section

The cross-section loops where a cutting plane meets a registered solid, as JSON: one object per loop with its edge count, the form-tag name of each edge's carrier, the loop's vertex positions, and — for a loop the analytic upgrade collapsed to ONE conic edge — that conic's radius or semi-axes.

The conic parameters are the point of reporting more than positions: a perpendicular cylinder cut must come back as an exact circle of the cylinder's own radius, and a chord polyline through the same vertices is indistinguishable from it by position alone.

Parameters#

json#

string

normal_x#

number

normal_y#

number

normal_z#

number

point_x#

number

point_y#

number

point_z#

number

Returns#

string

sew#

sew: (json, tolerance) => string = wasm.brep_sew_shells

Stitch coincident free-edge pairs of the outer shell. A non-finite tolerance means "not supplied", so the band defaults to the shell's own tolerance reach — which is what sewShells(undefined) does in TypeScript.

Parameters#

json#

string

tolerance#

number

Returns#

string

shell#

readonly shell: (json, thickness, open_face_indices) => string = wasm.brep_shell

Hollow the solid to a wall of thickness, opening the selected faces.

Parameters#

json#

string

thickness#

number

open_face_indices#

Uint32Array

Returns#

string

signedVolume#

signedVolume: (json, eps) => number = wasm.brep_signed_volume

Parameters#

json#

string

eps#

number

Returns#

number

solidEntityCounts#

solidEntityCounts: (json) => Uint32Array = wasm.brep_solid_entity_counts

[faces, edges, vertices].

Parameters#

json#

string

Returns#

Uint32Array

sphere#

sphere: (radius) => string = wasm.brep_sphere

Parameters#

radius#

number

Returns#

string

splitByLoops#

readonly splitByLoops: (json, loops_json, tolerance) => string = wasm.brep_shell_split_by_loops

Split every face of a shell by whichever cutting loops lie on ITS surface, returning a new shell. A face no loop applies to is carried through untouched.

Loops spanning several faces are NOT treated as one global arrangement — each face is split independently by its own subset, which is the TypeScript's stated behaviour and not an approximation of something better. The assignment band is max(face tolerance, 1e-5), the TS literal.

Parameters#

json#

string

loops_json#

string

tolerance#

number

Returns#

string

splitByPlane#

splitByPlane: (json, normal_x, normal_y, normal_z, point_x, point_y, point_z) => string = wasm.brep_split_by_plane

Split a registered solid by a cutting plane, returning [aboveHandle, belowHandle] where a 0 means that half is empty — the plane missed the solid entirely and the whole solid is on the other side.

The TypeScript's splitByPlane wrapper additionally packages the cut boundaries into a Path2d in the plane's own frame. That is a repackaging of the section loops [brep_section] already returns, in a 2D type the registry has no handle for, so the boundary exposes the geometric operation and leaves the packaging to the caller.

Parameters#

json#

string

normal_x#

number

normal_y#

number

normal_z#

number

point_x#

number

point_y#

number

point_z#

number

Returns#

string

splitC0BsplineEdges#

splitC0BsplineEdges: (json) => string = wasm.brep_split_c0_bspline_edges

Split C0 NURBS edges at full-multiplicity interior knots (ShapeUpgrade::C0BSplineToSequenceOfC1BSplineCurve). Returns the split count.

Parameters#

json#

string

Returns#

string

splitSelfIntersectingInnerLoops#

splitSelfIntersectingInnerLoops: (json) => string = wasm.brep_split_self_intersecting_inner_loops

Partition figure-eight inner loops into simple sub-cycles. Returns the number of inner loops replaced.

Parameters#

json#

string

Returns#

string

subtract#

subtract: (json_a, json_b) => string = wasm.brep_boolean_subtract

Difference (A - B): the material of A with B's material carved away.

Parameters#

json_a#

string

json_b#

string

Returns#

string

surfaceArea#

surfaceArea: (json, eps) => number = wasm.brep_surface_area

Parameters#

json#

string

eps#

number

Returns#

number

surfaceCross#

surfaceCross: (first_json, second_json, seed_region) => string = wasm.brep_surface_cross

Intersect two surfaces, returning every section branch with its 3D carrier and its uv image on each operand.

This is the whole taxonomy in one call — plane x plane's closed form, the plane x anything scalar reduction, and the general SSI core — because the dispatch between them is the intersector's own and not a caller's choice.

unsupportedReasons is reported rather than thrown: a pair the core declines has an ANSWER (usually no branches, sometimes some), and turning that into an exception would hide the branches it did find.

Parameters#

first_json#

string

second_json#

string

seed_region#

Float64Array

Returns#

string

surfaceCrossCurves#

surfaceCrossCurves: (first_json, second_json, seed_region) => string = wasm.brep_surface_cross_curves

The standalone surface pair as CURVES — brep_surface_cross without a solid to hold, and without the uv_curves a caller building topology needs.

Parameters#

first_json#

string

second_json#

string

seed_region#

Float64Array

Returns#

string

sweep#

sweep: (outer, holes_json, path_json, ruled, segments) => string = wasm.brep_sweep

Sweep a planar profile polygon along a NURBS path.

ruled skins the walls with flat quads; clearing it gives one interpolated NURBS surface per profile edge. segments of 0 lets the path's own curvature pick the station count.

Parameters#

outer#

Float64Array

holes_json#

string

path_json#

string

ruled#

boolean

segments#

number

Returns#

string

sweepProfile#

sweepProfile: (profile_json, holes_json, path_json, ruled, segments) => string = wasm.brep_sweep_profile

Sweep a planar profile bounded by CURVES along a NURBS path.

Rings are described exactly as [brep_extrude_profile] takes them; ruled and segments mean what they do on .

Parameters#

profile_json#

string

holes_json#

string

path_json#

string

ruled#

boolean

segments#

number

Returns#

string

tessellate#

tessellate: (document, deflection?) => TriangleMesh

Display mesh of a solid-root B-Rep document at deflection.

Parameters#

document#

string

deflection?#

number

Returns#

TriangleMesh

thicken#

readonly thicken: (json, thickness, symmetric, tolerance) => string = wasm.brep_shell_thicken

Shell.thicken — thicken an open shell into a solid by offsetting every face and joining the two sides with ruled lateral walls on the free edges. Answers a SOLID handle.

Parameters#

json#

string

thickness#

number

symmetric#

boolean

tolerance#

number

Returns#

string

thickOffset#

thickOffset: (json, distance, excluded_face_indices) => string = wasm.brep_thick_offset

Hollow the solid. Negative distance offsets inward (a cup); positive offsets outward (a jacket around the original). Selected faces stay where they are so the opening goes through them.

Parameters#

json#

string

distance#

number

excluded_face_indices#

Uint32Array

Returns#

string

torus#

torus: (major_radius, minor_radius) => string = wasm.brep_torus

Parameters#

major_radius#

number

minor_radius#

number

Returns#

string

transform#

readonly transform: (...args) => string

Parameters#

args#

...[string, Float64Array<ArrayBufferLike>]

Returns#

string

translate#

translate: (json, dx, dy, dz) => string = wasm.brep_translate

Parameters#

json#

string

dx#

number

dy#

number

dz#

number

Returns#

string

unifyDefaultOptions#

unifyDefaultOptions: () => Float64Array = wasm.brep_unify_default_options

The UnifyOptions defaults, as [unifyFaces, unifyEdges, linearTolerance, angularTolerance] with the two flags as 0/1.

Returns#

Float64Array

unifySameDomain#

unifySameDomain: (json, unify_faces, unify_edges, linear_tolerance, angular_tolerance) => string = wasm.brep_unify_same_domain

Merge adjacent same-surface faces (and, when unify_edges, fuse the collinear runs the merge leaves). Returns the merged count.

Parameters#

json#

string

unify_faces#

boolean

unify_edges#

boolean

linear_tolerance#

number

angular_tolerance#

number

Returns#

string

union#

union: (json_a, json_b) => string = wasm.brep_boolean_union

Union/// Union (A u B): all material in either solid, with the overlap counted once.

Parameters#

json_a#

string

json_b#

string

Returns#

string

validate#

validate: (document, toleranceScale, disabled) => ValidationReport

Validate a solid-root B-Rep document at toleranceScale, with disabled a comma-separated list of CheckId names — typed decode of the crate's report JSON.

Parameters#

document#

string

toleranceScale#

number

disabled#

string

Returns#

ValidationReport

validateOuterShell#

validateOuterShell: (document, toleranceScale, disabled) => ValidationReport

Validate only a document's outer shell — typed decode, same report.

Parameters#

document#

string

toleranceScale#

number

disabled#

string

Returns#

ValidationReport

vertexPositions#

readonly vertexPositions: (...args) => Float64Array

Parameters#

args#

...[string]

Returns#

Float64Array

voidShellDocuments#

voidShellDocuments: (json) => string = wasm.brep_void_shell_documents

Every VOID (cavity) shell of a registered solid, each as its own one-shell document, in the solid's own void_shells order. A solid with no cavity answers [] — an empty array, not an error, because "no voids" is an answer.

A void shell's faces are wound so their normals point INTO the cavity (topo/classify_shells.rs), and the copy carries that winding, so a reloaded void document probes exactly like the cavity it came from.

Parameters#

json#

string

Returns#

string

volume#

volume: (json, eps) => number = wasm.brep_volume

Parameters#

json#

string

eps#

number

Returns#

number